-40%
Flux Pen Soldering Non Corrosive 2 x 10 mL Amber For Leaded and Lead Free Solder

Flux Pen Soldering Non Corrosive 2 x 10 mL Amber For Leaded and Lead Free Solder

$ 9.64

Availability: 100 in stock
  • item_length: 1.0
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Brand: MG Chemicals
  • EAN: 0313041457413
  • MPN: Does Not Apply
  • Color: Does Not Apply
  • Model: 835-PX2
  • Return shipping will be paid by: Seller
  • item_width: 1.0
  • Size: 2 x 10 mL
  • Condition: New
  • Manufacturer: MG Chemicals
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted
  • UPC: 313053025037

    Description

    MG Chemicals 835-PX2 Flux Pen Soldering, 2 x 10 mL, Amber
    Size:
    2 x 10 mL
    DESCRIPTION: the 835-p rosin flux pen contains a Type RA rosin-activated flux composed of Pure water white (WW) grade gum rosin. It is a unique solvent system that contains very effective activators. The superior fluxing remains consistent throughout the entire aeration process. The 835 provides fast wetting action and complies with all requirements for Type Rom1 flux per j-std-004. Application: the 835-p pen is designed to dispense flux in a precise application and used for leaded and lead-free chemistries. Excellent for prototyping and rework/repair on printed circuit boards. Works well on chip carriers, heat sinks, surface mounted device pads, switches, and sockets. Application instructions: the flux pen controls the flow via a spring-loaded felt tip. This helps keep evaporation to a minimum between use. 1. Depress the tip against a hard surface until the felt tip gets wet, but not flooding. 2. Gently brush the wet tip onto the soldering area to apply. To keep the felt saturated and the flow controlled, only press in the tip as needed. Attention! do not continuously keep the tip Depressed or do not press too hard. This can jam the Valve open and cause flooding. Note that a fresh felt tip will take a several seconds to fully saturate, so expect a delay before the flux starts to flow on first use. Moving the tip in circular motion can help loosen the felt fibers and speed up the saturation process.
    For leaded and lead-free solder
    Fast wetting
    Non-corrosive
    Non-hygroscopic
    RoHS compliant
    Shipping
    Fast shipping is very important for us.
    Our standard US shipping service is FREE.
    Your order will be shipped within 2-3 business days upon full payment received.
    Your order will be delivered within 2-3 business days after the handling time.
    We only ship to the confirmed Paypal address. We reserve the right to cancel any order for any reason at any time.
    We are not responsible for undeliverable addresses.
    Returns and payment
    We offer a 30 days return policy from checkout winning date.
    We allow only PayPal as payment method
    FeedBack
    Your feedback very important to us, after you get your package and you are
    satisfied with our service
    please leave us positive feedback
    If you have any problem with your order / any questions please before leave any type of feedback
    For any questions, using eBay contact system
    Please visit our eBay store to check out other items for sale!
    Thank you for shopping at our store.